The APOE03 Power over Ethernet (PoE) Passive Injector delivers both data and electrical power to passive PoE devices using a single Ethernet cable. Using PoE you eliminate the need to place an Ethernet device, such as a wireless access point or IP Camera giving you more freedom. The installation is simple and easy for APOE03 it does not require any tools or software. Plug the APOE03 into a power outlet and connect the APOE03 to your passive PoE device using any standard Ethernet cable. Once APOE03 setup has been completed the output power is compatible to any 5VDC, 12VDC, 24VDC, 48VDC, 57VDC (Max. 48W) Passive PoE-enable device.

•Support Fast Ethernet Passive PoE-enable device (PIN 1/2/3/4 Data. PIM 4/5/7/8 Power)

•Provide both data and electrical power to Passive PoE-enabled device

•Support Wide Range input/output DC Power (5V – 57V at Max.48W)

•Dual DC Power Input – 3-pin Screw Terminal Block and Power Jack

•Wall mount ability

Technical Specifications:

Power	PIN 4/5, 7/8
Data	PIN ½, 3/6
Data In	Connects PC/HUB/Switch
Ethernet Data Rate	10/100TX Mbps
Ethernet Cable	Cat.5 / Cat.5e / Cat.6
Ethernet Cable Connector	RJ45
Support Input Voltage	5V – 57V (Max.48W)
Support Output Voltage	5V – 57V (Max.48W)
Built-In LED Indicators	Power
Operating Temperature	-0°C ~ 40°C
Storage Temperature	-20°C ~ 60°C
Operating Humidity	10% to 80% Non-Condensing
Storage Humidity	5% to 90% Non-Condensing
Power Supply	110 – 220V AC Power ; 5V – 57V DC input
Unit Dimensions	67*67*24mm (W*L*H)
Unit Weight	40g
Este producto esta en nuestro catálogo desde jueves 24 febrero.